Usb Handheld Scopemeter
Know Something about the Leads in Digital Multimeter by Ellashining
Digital multimeter as an accurate device used for voltage, resistance, and current. If you have used a multimeter, you might know it consists of the rotating selector switch, LED or LCD screen, and three interfaces on it. Take careful of the leads, so it can ensure the multimeter work normally. Here, this article will give you some tips on guiding you to connect the leads in multimeter.
Firstly, you should turn off the digital multimeter. Notice the indicator mark, making sure the multimeter is off so can operate the leads on it.
Secondly, you should to install the leads. When you are going to measure resistance, voltage or current, you should notice to connect the right leads. It is important for you to know the red lead is connected with “V ma” interface, while the black lead is connected “COMM”. If you want to measure higher current over 10 amps, you should make sure the black lead is plugged into the “COMM” and the red lead is plugged into the interface which labeled “10A”.
Thirdly, you should make sure the leads are completely into the digital multimeter avoiding contact not well. One way to check the leads on multimeter whether install successful is making the red lead and black lead together and the display shows “0.000″. On the other side?when the display shows “1- ” when the red lead and black lead touch together, you should check all the three tips to check, including the lead whether completely plugged into the sockets.
Are you looking for a digital multimeter? You can check for more information online, so you can know more about the multimeter. It must help you solove many problems. More purchase information on youroscilloscope.com, hope you can get a professional digital multimeter at a favorable price.
About the Author
Youroscilloscope.com is specialized in selling oscilloscopes online. High quality oscilloscopes supplied by China cheap on sale. Start your wholesale sourcing here from today to experience best service and fast shipping.
Fluke ScopeMeter 190-204 Series II: Key Functions
|
|
USB HandHeld Scopemeter Oscilloscope DMM 5.7″ DSO1200 $499.99 |
|
|
USB HandHeld Scopemeter Oscilloscope DMM 5.7″ DSO1060 $468.88 |
|
|
USB HandHeld Scopemeter/Oscilloscope DMM 5.7″ DSO1060 $429.24 |
|
|
DSO1200 USB HandHeld Scopemeter/Oscilloscope 5.7″ USG $609.00 |
|
|
USB HandHeld Scopemeter/Oscilloscope DMM 5.7″ DSO1060 $407.99 |
|
|
Handheld Color 25MHz Oscilloscope Scopemeter 200MS/s & DMM Multimeter 2in1 USB $289.00 |
|
|
DMM 5.7″ DSO1060 USB Handheld Scopemeter Oscilloscope $375.99 |
|
|
Handheld 10MHz 50MSa/s Oscilloscope Scopemeter & True RMS Multimeter 2in1 USB $213.00 |
|
|
DSO Nano oscilloscope V2 $94.00 DSO Nano v2 is a Digital Storage Oscilloscope designed for basic electronic engineering tasks. Within its smart shell, the device runs on ARM CortexTM-M3 32 bit platform, provides basic waveform monitoring with extensive functions. It equips 320*240 color LCD, micro SD card storage, portable probes, LiPo Battery, USB connection and signal generator. Due to palm size and handy performance, it fits … |
|
|
Owon HDS1021M 20 MHz Handheld Digital Storage Oscilloscope $249.95 Bandwidth: 20MHz — Sample rate(Real time): 100MS/s — Horizontal Scale(S/div): 5ns/div~100s/div, step by 1~2.5~5 — Rise time (at input, typical): =17.5ns — Channels: Single — Display 3.5″color display with TFT panel (320×240 pixels) — Input impedance: 1MO±2%in parallel with 18pF±5pF — Probe attenuation factor: 1X, 10X, 100X, 1000X — Max. input voltage: 400V (DC + AC PK-PK, 1MO input impe… |
|
|
Velleman 10 MHz Handheld Oscilloscope $271.92 The Velleman Personal Scope is not a graphical multimeter but a complete portable oscilloscope at the size and the cost of a good multimeter. Its high sensitivity – down to 5mV/div – and extended scope functions make this unit ideal for hobby, service, automotive and development purposes…. |